ACURA Ham Radio Club Live FT8 & FT4 Decoder showing an HF transceiver, digital signal waterfall, decoded signals, and worldwide amateur radio contacts.

Live FT8 & FT4 Decoder

See who is on the air right now. This page shows every FT8 and FT4 station a real HF receiver has decoded in the last few minutes, on a live world map and in a list. It updates by itself every minute, so you can leave it open and watch the bands come alive.

LIVELoading decodes from the receiver…

Each dot is a station the receiver decoded, colored by band and placed by its grid square. The gold star is the receiver. Tap a dot for details.

Stations Heard

Time (ET)CallBandModeSNRGridCountryMilesMessage
Loading…

Decodes come live from an UberSDR receiver in Milford, PA (grid FN21mh) on a G5RV antenna. The list refreshes every minute. Distances are from that receiver.

How to Use the Live FT8 & FT4 Decoder

  1. First, pick a mode at the top: FT8, FT4, or Both.
  2. Next, choose a time window. Last 15 minutes is a good place to start.
  3. Then look at the band buttons. The bar on each one shows how busy that band is right now. Tap a band to show only that band.
  4. After that, check the map. Each dot is a station, colored by band. Tap a dot to see the callsign, country, signal report, distance and message.
  5. Finally, scroll down to the list. Use the sort menu to see the newest, farthest or strongest stations, or type a callsign or country in the search box.

What Is FT8?

FT8 is a digital mode made for weak signals. A computer sends a short, set message in a 15-second time slot, and the station on the other end decodes it with software such as WSJT-X. Because the computer does the listening, FT8 can make contacts when a voice signal would be far too weak to hear. That is why it is so popular for working DX with small antennas and low power.

FT4 is its faster cousin. It uses 7.5-second time slots, so it is great for contests and for quick contacts when a band opening is short.

What the Map Tells You About the Bands

This page is also a live propagation check. When a band is open, the map fills up with dots from far away. When it is closed, the dots thin out or stay close to home. Watch how the busy bands change through the day:

  • Daytime: 20, 17, 15, 12 and 10 meters usually carry the long-distance signals.
  • Evening and night: 40, 80 and 160 meters often take over as the higher bands close.
  • Gray line: around sunrise and sunset, look for stations from Europe, Africa and the Pacific to pop up.

If you see a band full of faraway stations, that is a good time to get on that band yourself.

Where These Decodes Come From

The decodes come from an UberSDR receiver in Milford, Pennsylvania (grid FN21mh), which runs on a G5RV antenna and decodes FT8 and FT4 on every HF band around the clock. It is the same receiver behind our SDR Receiver page. Because it is about 130 miles north of us, what it hears is a very good guide to what you can hear from South Jersey.

Distances on this page are measured from that receiver, not from your home. Map dots are placed by grid square, so a dot shows the area a station is in, not its exact address.

Tips for New Hams

  • Look for the tags. A green POTA tag means a Parks on the Air station is calling CQ from a park. A pink DX tag means the station wants faraway contacts.
  • Read the SNR. SNR is the signal report in dB. Numbers near 0 or above are strong. Numbers like -18 or -20 are very weak but still decoded.
  • Click a callsign. Every callsign links to QRZ, so you can see who the station is and where they are.
  • Try it yourself. If you have a General or Extra license and an HF radio, download WSJT-X and tune to the frequency where you see the most activity.

Want help getting on FT8 for the first time? Ask at a club meeting, or try our Ask a Ham & AI Elmer page. You can also see how far your own signal goes on our WSPR Analytics page.

Frequently Asked Questions

Is this data really live?

Yes. The receiver decodes stations every 15 seconds, and this page pulls a fresh list about once a minute. The time on each row is the last time that station was heard, shown in Eastern time.

Why does a station only show up once?

Each station is listed once per band and mode, with the most recent time it was heard. That keeps the map and list easy to read.

Can I see my own FT8 signal here?

If the receiver in Milford, PA decodes you, your callsign will appear on the list. Type it in the search box to check. For a full picture of who hears you around the world, PSK Reporter is the best tool.

Do I need a license to use this page?

No. Anyone can watch the decoder. You only need an amateur radio license if you want to transmit. If you would like to get licensed, see our Testing Schedule.

Thanks to K3FEF and W3TKP for sharing their receiver with the ham radio community.