AI Band Scanner
Which ham bands are busy right now? This AI band scanner finds out for you. Every few minutes it sweeps ten HF bands on a live receiver, counts the signals, and labels what each one most likely is. Then one click tunes our receiver to any signal so you can hear it.
Every number here is a real, live measurement from the receiver behind our SDR Receiver. The labels are a best guess from how wide each signal is and where it sits in the band, so a signal marked “voice” is most likely voice, not guaranteed. Press Listen to tune the receiver to it and hear for yourself. On the receiver page, press POWER to start the sound.
How the AI Band Scanner Works
First, the scanner pulls a live picture of each band from the same receiver that powers our SDR Receiver page. Next, it measures the noise floor, which is the steady hiss with no signals in it. After that, anything that rises well above the noise counts as a signal. Finally, the scanner looks at how wide each signal is and where it sits in the band.
- Voice (SSB): a wide signal in the phone part of the band.
- Morse code (CW): a very narrow signal in the CW part of the band.
- Digital: a medium-width signal in the data part of the band, such as RTTY or PSK.
- FT8: activity inside the well-known FT8 slice of each band.
- AM or broadcast: a very wide signal.
How to Use It
Start with the band marked Busy or Packed. Then press the green Listen button next to a signal. As a result, the SDR Receiver opens already tuned to that frequency. Press POWER on the receiver to hear it. In addition, the AI band report at the top sums up all ten bands in plain English.
Want to know why a band is open or closed? Try the Ionosphere Ray Tracer or the Best Band Right Now Advisor. For spots from around the world, see the ACURA Live DX Map.
