
Emergency Message Router: Plan and Track Relay Routes for Ham Radio
In a disaster, the hardest job on the net is often simple to say. A shelter has a message, and the hospital needs it. But the internet is down, a repeater is dark, and nobody is sure who can still hear whom. The Emergency Message Router plans the path for you. You pick where the message starts and where it needs to go. Then it finds the best relay route across every working mode: our linked repeaters, simplex, the MeshCore mesh, HF NVIS, SoundBridge and even a volunteer with a car.
Think of it like the GPS in your car. You enter a destination, and it shows each turn. If a road closes, it finds a new way. The Emergency Message Router does the same for radio traffic, hop by hop.
The page has two modes. Use Plan Ahead on a quiet day to test every route before a storm, find the weak spots and print a communications plan. Then use Live Emergency when it counts, to send a real message and track it hop by hop.
Loading the Emergency Message Router…
Set It Up for Your Town or the Whole County
Every town in Atlantic County can make the router its own. First, pick your town, or Atlantic County as a whole, from Set up for at the top of the tool. Then open Your places, repeaters and sharing and add the places that matter to you: shelters, schools, fire houses, police and your own EOC. Type the address and the router puts it on the map. You can also add your own repeaters and MeshCore nodes, so the plan uses every system your town has.
Each town keeps its own setup, with its own places, relay stations and printed plan. When the setup is ready, press Copy share link and send it to your net control operators and OEM staff. They open the link, tap Load it, and everyone has the same plan. Your setup stays on your own devices. Nothing is stored on the club website. You can also bookmark your town directly, for example acurahamradio.org/emergency-message-router/?for=galloway.
Plan Ahead: Build Your Emergency Communications Plan
A good plan starts long before the wind picks up. Plan Ahead checks every shelter, hospital and town against the place your messages must reach, such as the county EOC. It tests each one in five situations: a normal day, a big storm, a 12-hour blackout, a 3-day blackout and a day when the repeater links drop.
- Green means a solid radio route with a backup.
- Yellow means radio works, but there is no backup or one station carries everything.
- Orange means no radio path at all, so only a driver can carry the message.
- Red means nothing gets through.
Next, the router lists every problem it found. It also tests possible new relay spots and names the towns where one more station would help the most. Finally, it prints a full communications plan with a primary and backup route for every place, plus the repeaters, simplex channels and relay roster. Put a copy in the go-kit and the AUXCOMM binder. Tap any square in the grid, and that route opens in Live Emergency, ready to send.
Live Emergency: How the Relay Route Planner Works
- Pick From and To. Choose a hospital, the county EOC, a town, or click any spot on the map. Tell it what radios each end has.
- Tell it what still works. Use a quick scenario, such as Big Storm, or tick boxes for power, internet, cell phones and roads. You can also pull live repeater status from our Repeater Status Board.
- Add your relay stations. Enter the hams on your net, where they are, and what gear they have. Then share the list with the other net control phones.
- Get the route. The map draws every hop in color. Each hop card shows the mode, the frequency and who passes the message to whom.
- Send and track it. Each hop turns green when the next station confirms. If a hop fails, press the red button, and the router re-routes from the station that holds the message.
Backup Routes and Weak Links
Every route comes with a backup that avoids the same stations and repeaters. The router also tests each piece of the route on its own. If one station or repeater is the only way through, it warns you. As a result, you know which sites to protect before the storm arrives. This makes it a strong planning tool for AUXCOMM teams, ARES groups and emergency managers, too.
Works With SoundBridge
When both ends of a hop have SoundBridge, the router says so. Tap Copy for SoundBridge, paste the text into SoundBridge, and send it as tones. Each tracked message carries a short code, such as MG-7K2P. When SoundBridge gets the automatic receipt on the same phone, that hop lights up green by itself. For longer drives, the courier hops point you to the SoundBridge Courier QR code, so nothing gets copied wrong.
Good to Know
- The Emergency Message Router plans and tracks the route. Operators still press the talk button and pass the traffic.
- Ranges are planning estimates for flat South Jersey terrain. For that reason, always confirm each hop on the air.
- Your stations, places and messages stay on your own device. Nothing is sent to the club.
- Once the page has loaded, the planner keeps working without internet. Only the map tiles and live repeater status need a connection.
- Want to see the whole network fail first? Try our Last Link Standing blackout simulator and the Emergency Comms Dashboard.
The Emergency Message Router is free for every ham and every EmComm group. It was built by ACURA, the Atlantic Coast United Radio Association (AG2NJ), in Galloway Township, New Jersey. Come try it at a Thursday net drill, and tell us how to make it better.
