
Full Quieting: Crowd-Sourced Repeater Coverage Map
Every repeater coverage map you have ever seen is a guess, worked out from antenna height and terrain. Full Quieting is different. It builds a real, measured coverage map from what hams actually hear while they drive. Pick a repeater, set your phone next to your radio, and drive as usual. Each time the repeater transmits, the page grades how clean it sounds and drops a colored dot on the map. Over time, every member’s drives add up to a true picture of where the repeater works.
It starts with the ACURA repeaters in Atlantic County, New Jersey. However, it works for any FM repeater in the world, so hams everywhere can add their own and start mapping.
How It Works
First, pick a repeater at the top of the page, or add yours with the Add a Repeater tab. Next, open the Start Mapping tab, tick the I agree box and press Start before you pull out. For the first few seconds, the page learns your car’s background noise, so keep the radio quiet. After that, whenever the repeater transmits, the page listens through your phone’s microphone and grades the signal from Full quieting down to Lost in the noise. It then pairs that grade with your GPS position.
A clean, noise-free signal shows up green. As the signal gets weaker, the dots turn yellow, orange and finally red. Passengers can also tap Clear, Scratchy or Lost by hand. Drivers should never touch the phone while driving, because the page works on its own.
Your Privacy Comes First
The sound is analyzed on your own phone and is never recorded or uploaded. Only anonymous map dots are saved: a location rounded to about 10 meters and a 1 to 5 clarity score. In addition, the first and last half-mile of every drive are trimmed off before anything is saved, so no home or work address ever appears on the map. Adding your call sign is optional, and it is used only for the Top Mappers list. You can read more in our Privacy Policy.
Frequently Asked Questions
Does the automatic grading work with any radio?
Yes. It listens to your radio’s speaker, so it works with any brand of mobile or handheld radio. For the best results, keep the volume at a normal listening level and the phone close to the speaker. The automatic grading is new, so if a reading looks wrong, a passenger can override it with the Clear, Scratchy and Lost buttons.
Why does my phone need to stay on?
Phones pause web pages when the screen locks. The page asks your phone to keep the screen awake while you map, so plug it into a charger for longer drives.
Can I map a repeater outside the United States?
Absolutely. Use the Add a Repeater tab and choose how your repeater opens, including CTCSS tones, DCS codes and the 1750 Hz tone burst common in Europe. You can also switch the units to kilometers.
How does this help in an emergency?
Measured coverage shows exactly where a repeater can be trusted. Clubs can use it to find dead spots, plan new sites and spot a failing antenna early. It also pairs nicely with Last Link Standing, our blackout simulator, and with the Repeater Coverage Maps and the Repeater Status Board.
