ACURA RFI DETECTIVE showing an HF ham radio transceiver, smartphone audio waterfall display, and radio interference from power lines, solar panels, and LED lighting.

RFI Detective

Noise on the bands is the number one complaint in ham radio today, and most of the time nobody knows what is causing it. RFI Detective listens to the noise coming out of your radio and tells you what is most likely making it: a power line, an LED bulb, a phone charger, a solar inverter, VDSL internet, an electric fence and more. Then it gives you a step-by-step plan to hunt it down and fix it.

It works anywhere in the world, it is free, and your audio never leaves your phone or computer. The analysis runs right in your browser.

Step 1: Set up your radio

  1. Tune to a clear spot where you hear the noise, in SSB or AM with a normal or wide filter (2.4 kHz or more).
  2. Turn OFF the noise blanker, noise reduction and any DSP filters, so the detective hears the raw noise.
  3. Set the volume to a comfortable level and hold your phone or laptop about 6 inches (15 cm) from the speaker. Keep the room quiet.

Step 2: Let the detective listen

0 HzLive waterfall of what the detective hears3,200 Hz

🗺️ The Worldwide Noise Map

Loading the map…

🔒 Your audio never leaves your device. The analysis runs right in your browser, and the map only stores a 4-character grid square, the band and the noise type.

How to Use RFI Detective

  1. Tune your radio to a clear spot where you hear the noise, in SSB or AM, with a normal or wide filter.
  2. Turn off the noise blanker, noise reduction and DSP filters. The detective needs to hear the raw noise.
  3. Hold your phone about 6 inches from the speaker and tap Listen with my microphone. Keep the room quiet for 30 seconds (8 seconds is the minimum).
  4. Read your result: the likely source, why the detective thinks so, how to hunt it down and how to fix it.
  5. Tap Add to the Noise Map to help other hams see where noise problems are. Only your 4-character grid square, the band and the noise type are saved.

Already recorded the noise? Use Analyze a recording to load an MP3, M4A or WAV file instead. Want to know what each noise sounds like? Pick one from Hear a sample noise.

What RFI Detective Can Identify

  • Power line arcing: a raspy buzz that pulses with the power line, often worse in dry weather.
  • LED bulbs, dimmers and lighting: buzzy hash that starts when certain lights come on.
  • Switching power supplies and chargers: whistles that drift and wander in pitch.
  • Solar inverters and 60 Hz devices: a hash that pulses at the power line rate, often daylight only.
  • Broadband hiss: VDSL internet, Ethernet and powerline network adapters, or just normal band noise.
  • Electric fences: a sharp tick about once a second.
  • Thermostat devices: noise that switches fully on and off in cycles.
  • Steady carriers (birdies): clean tones from clock chips in TVs, computers and routers.
  • Static crashes: natural lightning static with no rhythm.

Frequently Asked Questions

Does it record or upload my audio?

No. The detective analyzes the sound inside your browser and throws it away. Nothing is sent to ACURA or anyone else. The Noise Map only gets what you choose to add: a 4-character grid square, the band and the noise type.

How accurate is it?

It is a smart first guess, not a lab test. It reads the noise’s fingerprint: how it pulses with the power line, how spiky it is, whether it has drifting whistles or steady tones, and whether it switches on and off. Clear, strong noise gives the best result. Always confirm with the hunt steps, starting with the battery and breaker test.

Why does it ask about 50 Hz or 60 Hz?

Power line noise pulses at twice the power line frequency: 120 times a second in North America and 100 times a second in most of the rest of the world. The page picks the right setting from your time zone, and you can change it.

Who do I call about power line noise?

Your power company. Ask for their RFI or interference investigator and give them the pole number where the noise is loudest. In the United States, the FCC requires utilities to fix interference their equipment causes, and the ARRL RFI desk can help ARRL members. Never touch or climb utility equipment yourself.

Related Tools

Band Noise & QRN Forecast · Listen on the ACURA SDR Receiver · Live FT8 & FT4 Decoder · Antenna Report Card · Path Watch