ACURA Ham Radio Club Band Noise & Activity History showing an HF transceiver, glowing S-meter, radio band activity graphs, and a nighttime thunderstorm.

Band Noise & Activity History

Is the band noisy, or is it just you? This page shows how loud the background static is on every HF band right now, how busy each band is, and how today compares with the past 30 days. It uses real readings from an HF receiver that checks every band about once a minute.

LIVELoading band readings from the receiver…

Right Now on Every Band

BandNoise nowUsual nowCompared to usualActivity nowUsual activity
Loading…

Noise is the background static level in dB. A lower (more negative) number means a quieter band. Activity is how much of the band is filled with signals. “Usual” is the average for this same hour over the past 30 days. Tap any band to see its history below.

20m: The Last 24 Hours

Noise floor (dB, lower is quieter)
Band activity (% of the band in use)

When Each Band Is Busiest

Average for each hour of the day (Eastern time) over the past 30 days. Colors compare the hours within each band.

20m: The Past 30 Days

Daily average noise floor (dB)
Daily average activity (%)

Readings come from an UberSDR receiver in Milford, PA (grid FN21mh) on a G5RV antenna, which measures every band about once a minute. The live readings refresh every 5 minutes, and the 30-day history updates every hour.

How to Use This Page

  1. First, look at the Right Now on Every Band table. It shows the noise and activity on each band and tells you if a band is quieter or noisier than usual for this time of day.
  2. Next, tap a band in the table, or use the band buttons, to load its history.
  3. Then check The Last 24 Hours. The blue line is what the band did today. The dashed orange line is what it usually does at that hour.
  4. After that, look at When Each Band Is Busiest. Brighter squares mark the busiest hours of the day for each band. Switch to Noise to find the quietest hours.
  5. Finally, scroll to The Past 30 Days to see if a band has been getting noisier or busier over the month.

What Is the Noise Floor?

The noise floor is the level of background static on a band when no one is talking. Every receiver hears some of it. It comes from lightning storms, the sun, and the electronics around us, like power lines, solar chargers, LED lights and computer power supplies.

On this page the noise floor is shown in dB. The numbers are negative, so a lower (more negative) number means a quieter band. For example, -115 dB is quieter than -95 dB. A quieter band makes weak signals easier to hear.

Low bands like 160 and 80 meters are almost always noisier than high bands like 10 meters. That is normal, which is why the table compares each band with its own usual level.

What Does Band Activity Mean?

Activity is how much of the band is filled with signals. When a band opens up, more stations get on the air and more distant signals come in, so the activity number goes up. On 20 meters in the daytime it is common to see a third of the band in use. On 10 meters, activity jumps when the band opens to Europe or South America.

How Hams Use Noise History

  • Find the best time to operate. The busiest hours on the chart are usually when the band is open and you can make the most contacts.
  • Check before you blame your radio. If your receiver sounds noisy, see if the band is noisier than usual here too. If it is, the noise is from the band, not your station.
  • Spot local noise at home. If this page says the band is quiet but your radio is loud, the noise may be coming from something near your house. That is a good time to try turning off breakers one at a time to find it.
  • Plan nets and activations. Pick the hours with lower noise for a club net, a POTA activation, or a Field Day schedule.

Want to see which stations are being heard right now? Visit our Live FT8 & FT4 Decoder. To pick a band right away, try Best Band Right Now, or listen for yourself on the SDR Receiver.

Where These Readings Come From

All readings come from an UberSDR receiver in Milford, Pennsylvania (grid FN21mh), which runs on a G5RV antenna. It measures the noise floor and band activity on every band about once a minute, all day and night. The receiver is about 130 miles north of Galloway Township, so its readings are a good guide to band conditions in South Jersey. Your own noise level at home can be different because of the equipment near you.

Frequently Asked Questions

How often does this page update?

The live readings refresh every 5 minutes. The 30-day history adds a new day every day, and the oldest day drops off.

Why is 160 or 80 meters so noisy?

Low bands pick up much more natural static from storms, and more man-made noise from power lines and electronics. Noise on these bands is usually highest in the summer and lowest on cold winter nights.

What counts as quieter or noisier than usual?

If the band is at least 2 dB quieter than its average for this hour, it is marked quieter. If it is 2 dB or more above average, it is marked noisier, and 6 dB or more is marked much noisier. Each 6 dB is about one S-unit on your radio’s meter.

Do I need a license to use this page?

No. Anyone can use it. If you would like to get on the air, see our Testing Schedule to find the next license exam.

Thanks to K3FEF and W3TKP for sharing their receiver with the ham radio community.